Features and Installation of LED Display

Features of LED Display

Compared with other large-screen terminal displays, LED display has the following characteristics.




1. High brightness. The brightness of outdoor LED display is over 8000mcd/m2. This kind of display is the only large-scale all-weather display that could be used for all day long. The brightness of indoor LED display is over 2000md/m2.

2. Long service life. LED's service life is up to 100,000 hours (about ten years) or more. This specification refers to the design life of LED.

3. Large view angle. Indoor LED display's view angle could reach 160 degrees or more; and outdoor LED display's view angle is over 120 degrees. The view angle is determined by the shape of light-emitting diode.

4. LED displays vary from each other in size. There is 1 square meter display as well as displays of hundreds or thousands of square meters.

5. It's easy to connect LED display with computer. The display supports numbers of software.
energy-saving LED display screen

Installation of LED Display

Installation of led display determines the display effect in use. Generally, there're 5 ways for LED display installation.

1. Embedding
This installation way is good for installing small indoor LED display screen. In order not to occupy too much space, you could dig out an area, which is the same size as the display screen, in the wall, and embed it into it. Be sure you do it on a solid wall. Besides, this installation way cost a higher fee on maintenance.

2. Hanging
Hanging installation is more applicable to stations, airports and other similar applications. LED displays used in these applications mainly plays as signs; thus the size should be less than 10 square meters. In addition, a rear cover should be added to the display during installation.



3. Wall-mounting
Wall-mounting is nice for indoor led display's installation. The display is usually in less than 10 square meters, and the wall should be solid. Neither cavity wall nor thin division wall are not suitable for installing LED display.

4. Roof-mounting
Roof mounting is mainly used for outdoor advertising display. The display screen is usually installed to the roof of a building. Wind disturbances should be take into consideration if you're going to mount the display to a very high building.

5. Post-mounting
Post-mounting could be different upon LED display's size. It's used for installation of outdoor advertising display at squares, parking lots, and other open areas.


Recommended Posts:
"What's LED Display?"
"LED Display's Classification"
"LED Display Screen Buying Guide"
"How to Select High Quality LED Displays?"
"Do's N' Don'ts with LED Display"
"Overview of Stage Lighting for Newbies"
"4 Aspects to Understand LED Stage Light"
"LED lighting"

No comments:

Post a Comment